**Column**
| **Description**
|
Order
| Allows for quick rearranging of camera order. Right clicking on drag will allow for deleting the row.
|
Mute
| Allows for removing access to a specific camera or to leave a blank spot on the panel
|
Bound Device
| Allows for the selecting of a specific connected camera
|
Device ID
| Ties the camera selector to the specific device. This is found in the Devices section. Each device will have a unique device number per device core. This box should auto-populate when a camera is selected in binding
|
Combo Device ID
| The Device ID associated with the combo device (usually a pan/tilt head) when creating a combo device to present as a single device on the panel.
|
Camera Name
| Customizable name to appear on the displays. Character limit is determined by size of display and can vary.
|
Camera Config
| Selects the protocol based configuration associated with camera. Needed protocol can be seen in the Devices section, each device is grouped into their native protocols. **Double check the correct configuration is selected. Improper selection will effect camera control.**
|
Iris Channel Config
| Selects the needed protocol for Iris/Master Black control. For cameras without a variable lens this will follow the same protocol as the device. For cameras with a variable lens, select the protocol for the attached lens. **Not available on all configuration classes.**
|
Tally Forward Config
| Selects the needed protocol for Tally to the cameras. . **Not available on all configuration classes.**
|
Tally Index
| Sets the Tally Index number to connect with associated tally source device. See Blue Pill/Reactor Manual for more information. **This column does not need to be filled out for standard operation.**
|
Route Index
| Sets the Route Index number to connect with associated routing device. See Blue Pill/Reactor Manual for more information. **This column does not need to be filled out for standard operation.**
|
FrameLink Window
| Sets the FrameLink Window value associated with the FrameLink device core for use with FrameLink compatible devices. See Blue Pill/Reactor Manual for more information. **This column does not need to be filled out for standard operation.**
|
Ext. Cam Number
| Sets an External Camera Select number that is used in a virtual trigger to allow for syncing the camera select between multiple panels.
|
Color
| Allows for the selecting of a custom color for the camera select buttons. **This would be overridden as needed if Tally Forwarding from a switcher is set up.**
|
Presets
| Customize name and color for presets associated with specific camera configurations.
|

| Delete the row.
|

| Duplicates the details of the column.
|

| Increments the number in the column by +1.
|

| Adds a new line to create additional camera selects.
|

| Opens a table to create multiple new camera selects. **See Batch Create section below.**
|