Engineering Menu

This documentation might be outdated. Please consult the Reactor manual at https://docs.skaarhoj.com/3_configuration/default-configurations.html#engineering-menu 

 The engineering menu contains panel settings like, Brightness control and dim/sleep time. You can also find other settings like, expert mode and global Invert pan/tilt. 

 It can be accessed in different ways based on the panel, and chosen configuration. 

 How do I know which method my configuration is using? 

  Here we have listed the different 'panel configurations' that have the engineering menu. Remember this is a list of configurations. So the specific panels named here, only have access to the engineering menu, when the loaded configuration contains such menu. This also means that you will find panels not named here, that can also access an engineering menu. To find the exact method used in your panel config, you can navigate the list here, and try methods that is in correspondence with your panel type. 

 

 Method 1 - Camera selector 

 This technique is used for panel configurations that has a camera page button or a combo menu button, that both cycle camera pages and the menus. 

 

 How to activate 

 Press and hold the top edge of the 'Page' button   A  for a few seconds 

 

 Examples of models using this method: 

 Listed here is 4 panels that have support for a configuration, that have an engineering menu accessible the same way. Remember this is just examples, and that this method is not exclusive to these 4 panels. 

 PTZ Wiz 

 PTZ Fly 

 

 Rack Control Uno 

 Inline 22 

 

 

 

 Method 2 - PTZ Pro 

 This technique is used for PTZ Pro only. 

 

 How to activate 

 Press and hold U4   A  for a few seconds  

 

 Examples of models using this method: 

 This method is exclusive to the panel showed below 

 PTZ Pro 

 

 

 Method 3 - PTZ Extreme 

 This technique is used for PTZ Extreme only. 

 

 How to activate 

 Press and hold U4   A  for a few seconds  

 

 Examples of models using this method: 

 This method is exclusive to the panel showed below 

 PTZ Extreme 

 

 

 

 Method 4 - RCP 

 This technique is used for every RCP panel (with config: "RCP - Generic PTZ Control"). 

 

 How to activate 

 Step 1) Press and hold the 'Shift' button   A  Step 2) Now press the 'Panel lock' button  B  to enter the engineering menu 

 

 Examples of models using this method: 

 Remember this is just examples, and that this method is not exclusive to this RCP panel only, but all RCP models, with the config "RCP - Generic PTZ Control". 

 RCPv2 

 

 

 

 Method 5 - MEGA Panel 

 This technique is used on panel MKT1B and MKT1A 

 

 How to activate 

 Step 1) Press 'Menu'   A  to make the settings button appear  Step 2) Press 'settings'  B  to enter the engineering menu 

 

 Examples of models using this method: 

 This method is not exclusive to the panel showed below, but also MKT1A. 

 MKT1B 

 

 

 

 Method 6 - Switcher Selector 

 This technique is used for panel configurations in the switcher class. 

 

 How to activate 

 Step 1) Press 'Shift'   A  to make the FTB button light green Step 2) Press 'FTB'  B  to enter the engineering menu 

 

 Examples of models using this method: 

 Listed here is 3 panels that have support for a configuration, that have an engineering menu accessible the same way. Remember this is just examples, and that this method is not exclusive to these 3 panels. 

 Airfly 

 

 Airfly Pro 

 

 Master Key One 

 

 

 

 Method 7 - Kairos 

 This technique is specific for our Kairos configuration for the Master Key One V2 (Blue pill inside) 

 

 How to activate 

 Step 1) Press and hold the button marked  A    Step 2) Now press the button marked   B   to enter the engineering menu 

 

 Examples of models using this method: 

 This method is exclusive to the Kairos configuration on the panel showed below 

 Master Key One V2 

 

 

 Method 8 - Audio & Light Control 

 This technique can be used for most panels with an 'Audio & Light Control' config. 

 

 How to activate 

 Step 1) Press and hold the first pager button. 

 

 Example of model using this method: 

 Waveboard V2