Sony FX6

You can connect to Sony FX6 camera via cabled Ethernet or Wifi. We strongly suggest to use cabled Ethernet. This will work with multiple FX6 cameras - they just need to have unique IP addresses. 

 Wired LAN setup 

 You need to enable Wired LAN in the camera settings: • Menu > Network >    - Access Authentication > Input password > set new password    - set Wired LAN = ON    - set Remote Control = ON 

 Also, you must set a static IP address: • Menu > Network > Wired LAN > Detail Settings >    - DHCP = OFF    - Enter static IP / Subnet / Gateway 

 

 

 USB-C to Ethernet adaptor 

 To use cabled Ethernet, you need a "USB-C to Ethernet adaptor". It is critical that you use an adaptor with compatible chip-set: 

 

 Realtek RTL8153 

 AX88179 

 

 Note: There are many other adaptors not working. They can even crash the FX6. This includes a chip-set with similar name; AX88179 A - (has an A at the end) which does NOT work. 

 Here is an example of a working adaptor from a Danish webshop (availability of this product may expire): https://www.av-cables.dk/usb-3-1-til-rj45-netvaerksstik/delock-usb-c-3-1-gen1-ethernet-adapter-10-100-1000-mbps-s.html 

 Another product (this is NOT tested by us, but has correct chipset): https://www.proshop.dk/Netvaerksadapter-netkort-printserver-mv/AXAGON-Gigabit-Ethernet-USB-C-External-Network-Adapter/3414405