# TSL

If you have a PTZ controller you can use TSL as the Routing trigger. That could be beneficial if you want your Camera selector to also route a source external in equipment using TSL, like Tallyman.

1. Add Cameras to your Controller  
    [![image.png](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/scaled-1680-/QhYimage.png)](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/QhYimage.png)
2. Press Camera Selector  
    [![image.png](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/scaled-1680-/ZgOimage.png)](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/ZgOimage.png)
    
      
    
    1. Fill in Route Index what TSL Address should be used for the specific source
3. Press Routing Trigger 
    1. Add new
    2. Bind to your TSL Device  
        [![image.png](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/scaled-1680-/k4Oimage.png)](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/k4Oimage.png)
    3. Select TSL Config in the Switcher or Hub section  
        [![image.png](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/scaled-1680-/7gyimage.png)](https://wiki.skaarhoj.com/uploads/images/gallery/2022-11/7gyimage.png)
    4. Specify what Tally bit (v3.1) or Position (v5.0) you want to use   
        *Note: that the ME/Bus field is only used by TSL v3.1 and can be left blank when using TSl v5*