Vimeo Livestream Studio

Before connecting the core to Livestream Studio first time you need to check in the Hardware Control if Third-party controllers are enabled.
After you can start connecting your core to Livestream Studio. Your connection appears in pending connection -> You need to allow this connection and only after that core will able to connect to Livestream Studio.
So, As a result, you should have your BP address in the allowed connection.

Screenshot 2023-10-16 at 12.24.43.png

Auto-Discovery Of Livestream Studio

On the Blue Pill platform, we support auto-discovering devices. Livestream Studio 6 does currently not have a native way for us to do this by default, but if you go into settings and add an NDI output, then we can use that for discovery. For that to work, you will need to include at least one of 3 words in one or more outputs:

Once set up, it will look something like the below, and it should now show up in the device discovery list:

image.png


Revision #7
Created 16 October 2023 09:03:45 by Andrii
Updated 1 July 2025 08:01:14 by Andreas Hauge Thomsen