Blue Pill Panel Connections

Blue Pill Units

1	USB-A Port. See Settings page for more details
2	SKAARHOJ Expansion Slot. See extension cables section for more details (coming soon)
3	HDMI Port serial diagnostics and debugging
4	Config Button to enable WiFi Access Point. See Accessing Blue Pill section in Getting Started Guide
5	Status LED for monitoring and debugging
6	IP Network RJ45 Port for IP control and 5W-30W PoE (+)/PoE Standard: IEEE 802.3af/t
7	Micro USB Port for serial communication and 5V power

 

Blue Pill Inside Units

1	Micro USB Port for serial communication with SKAARHOJ Firmware Updater
2	IP Network RJ45 Port for IP control and 5W-30W PoE (+)/PoE Standard: IEEE 802.3af/t
3	Status LED for monitoring and debugging
4	Reset button. Use only under the guidance of SKAARHOJ support
5	Config Button to enable WiFi Access Point. See Accessing Blue Pill in the Getting Started Guide
6	12V DC Power Supply for connection to the supplied DC power adaptor
7	USB-A Port. See Settings page for more details, not available on all models

RCP Pro DB-9 Connector

The RCP Pro only has 3x GPI Input and 3x GPI Outputs that are programmable, this is different than the RCPv2.