Skip to main content

Example Setup - PTZ Control

In this article we are going to set up a Blue Pill for PTZ Control.
This article is also relevant if you are using other PTZ Controllers or PTZ Devices that the ones mentioned in this article.


1. Acces The Blue Pill

When you first receive the Blue Pill and power it on, the display will show you a IP address such as
192.168.10.99 To access the the Blue Pill, open any browser and enter this adress in the search field like so:

image-1646125852865.png

and press enter.

We cannot help you with what your exact IP adress will be, as this is determined by the routers and infrastructure that you are plugging your Blue Pill into. To get help talk to your local network administrator.

2. Adding a Panel with Discovery

To add a panel press the "Add Panel" button

image-1646126160344.png

Now you will be presented with this pop up:

The Add Panel Pop up

If your SKAARHOJ Panel (UniSketch or Blue Pill Inside) is connected to the same network as the Blue Pill it will appear on the "Discover Panels" Tab.
Please give it 5 sec to search for panels.
If you see your panel is this list, simply click "Select" to select that panel and return to the Home Screen.

image-1646126556272.png

Now you will see the Panel added to your collection.

image-1646127266974.png

Notice that it will try to connect, and show "connected" if successful.
You are able to identify it, by clicking the light bulb icon.

The Dropdown menu is automatically being filled with a recommend configuration, if you are not happy with this option you can choose another from the list.

2.1 Adding a Panel Manually

If your panel is not showing up on the list, (or you don't have it yet) go to "Add Panel Manually" in the "Add Panel" pop up.

image-1646127454482.png

From this list you can search SKAARHOJ vast collection of panels, and select one for your project by clicking on the panel

image-1646127528252.png


This will add the panel, and again autofill the mapping.

image-1646138179426.png

Notice that the status tag says "Missing IP".
To enter an IP, click the title of the controller to open the Panel Details Popup menu.

image-1646139005444.png

You can configure a panel, without having it physically. This lets you set up configurations and test from anywhere.

3. Adding a device.

Adding a device is similar to adding a panel

First you click "Add Device"

image-1646139314033.png

Now you can add Devices, either by Discovering them on the network, or manually adding them from our list of supported devices.

Just because a device exist in the does not mean, that the all functionality of that device has been implemented. To see what is implemented on a device please check the related device core manual