Skip to main content

Kessler Crane

Adding and connecting to a Kessler Crane device from the Blue Pill platform

The Blue pill can connect to a Kessler Crane device in two ways, via WiFi or USB, in both cases there are some special things that needs to be handled for the Blue Pill Core to connect sycsessfully.

First add your desired device inside reactor, by clicking the add device and selecting the "Add Device Manually". Then search and click add on your desired model. We do the setup for the manually as Kessler devices does not support auto discovery in their current state.

image-1657270287772.png

You should now be prevented with this device config box:

image-1657270736037.png

If your config box does not have the "Connection Type" option please click the save button and wait until you see the device on the left side say "Disconnected" or "Connected", it it's your first time installing the core it will say "Installing Core" waight for that to finish then restart reactor to load the new Device Config structure.

Clicking this "running" button will give you the option to restart reactor:

image-1657271066379.png
After restarting reactor, click on the device on the left side and you should now see the "Connection Type" inside the device config popup. Please set this option to your desired setup type and continue the setup below.

Connecting over USB

 

Connecting over WiFi