Skip to main content

Zoom OSC with XPoint24

How to set up Zoom OSC

...

Setup - Zoom OSC with our XP24

Use Zoom OSC with our XP24 to have everything at your fingertips 

We have created a Zoom OSC configuration for our XP24 panel. This means that everything is taken care of. By standard it's set up to auto populate, meaning that as users join the call they will be assigned a button, and from there you have full individual control and can toggle mute, video, and if the attendee is in spotlight or pinned. 

 

We have made it easy to change settings for all your attendees by making dynamic user commands. 

 

Step-by-step

Step 1

 

 Install Zoom OSC

Download and install the Zoom OSC software here 

https://www.liminalet.com/zoomosc

Works on MacOS and Windows

Step 2

Install package

 To control Zoom OSC from a Skaarhoj controller go to your bluepill via reactor. Navigate to the Packages tab and search for “ZoomOSC”

Step 3

Add Device

 

When the devicecore is installed correctly you can now search for “ZoomOSC” in the Device tab from Home. 


Difference for

ZoomOSC Essentials 

  • Choose this device if you only use the free version of Zoom OSC

ZoomOSC Pro 

  • Choose this device if you have a paid licence for Zoom OSC

ZoomOSC Pro Advanced

  • This has extra features, but isnt fully supported yet
Step 4

Setting up the device

 

 

IP address:

This IP address should be the PC running Zoom OSC


Receiving Port & Transmission Port:

Find ports in Zoom OSC Networking Settings

 

The value Transmission Port in Zoom OSC should be the Receiving in Reactor

The value Receiving Port from Zoom OSC should be the Transmitting in Reactor
Step 5 Adding Panel & choosing the right configuration

Make sure the XP24 is turned on. Now it should say “Waiting for raw panel”, and display its IP address 


In Reactor you can now press Add Panel. Search or find your XP24 panel. If it's not automatically detected you can choose to manually add it. Go to the tab “Add Panel Manually”

 

When added you can make sure the configuration is set to ZoomOSC

 

And now the panel will display one message “Meeting OFF”, meaning that is has connection to Zoom OSC on your computer and waiting for you to start a video meeting

Control - Zoom-OSC Config from XPoint24

Here is a run-through of the standard configuration for Xpoint24

Global Settings

The first thing you will see when you start the meeting is global settings in the top row, and a user row on the bottom.

  • Auto Populate
    This is on by default, and therefore the Host user has been assigned slot User 1. When Auto populate is active, attendees will automatically get assigned a button from the lower row
  • Populate
    Reset all - Th

image-1651753663068.png

 

 

Attendee settings

Choose an attendee and now you can toggle settings for that individual

image-1651754090123.png

  • Mute
    Toggle Mute for the Attendee (If the Attendee has muted themselves they will get a popup saying the Host has asked them to unmute)

  • Video
    Toggle Video for the Attendee (If the Attendee has turn off video themselves they will get a popup saying the Host has asked them to turn on video)

  • Pin 1 & 2
    Host can pin Attendees. This pin will only be visible for the Host

  • Spot
    Host can spot Attendees. This pin will only be visible for the Host

  • Lower Hand
    If the Attendee has used the function Raise Hand. The Host has the ability to lower the hand again 

 

Troubleshoot 

 

 

 

Back to top