Skip to main content

Engineering Menu

Intro

The engineering menu contains panel settings like, Brightness control and dim/sleep time. You can also find expert mode and global Invert pan/tilt.

It can be accessed in different ways based on the panel, and chosen configuration.

How do I know which method my configuration is using?

Different panel configurations will have the engineering menu. Here is the main ways of accessing the menu.

Method 1 - Camera selector

This technique is used for panel configurations that has a camera page cycle button.

How to activate

Press and hold the top edge of the 'Page' button for a few seconds

Examples of models using this method:

Listed here is 4 panels that have support for a configuration, that have an engineering menu accessible the same way. Remember this is just examples, and that this method is not exclusive to these 4 panels.

PTZ Wiz
image-1654849804428.png

PTZ Fly
image-1654868124088.png

Rack Control Uno
image-1654850821883.png

Inline 22
image-1654851618999.png

Method 2 - Switcher Selector

This technique is used for panel configurations in the switcher class.

How to activate

Step 1) Press 'Shift' to make the Fate To Black button light green
Step 2) Press 'FTB' to enter the engineering menu

Examples of models using this method:

Listed here is 3 panels that have support for a configuration, that have an engineering menu accessible the same way. Remember this is just examples, and that this method is not exclusive to these 3 panels.

Airfly
image-1655362032848.png

Airfly Pro
image-1655362238139.png


Master Key One
image-1655364776751.png



Method 3 - MEGA Panel

This technique is used on panel MKT1B and MKT1A

How to activate

Step 1) Press 'Menu' to make the settings button appear 
Step 2) Press 'settings' to enter the engineering menu

Examples of models using this method:

This method is not exclusive to the panel show below, but also MKT1A.

MKT1B
image-1654861721203.png


Method 4 - RCP

This technique is used for every RCP panel (with config: "RCP - Generic PTZ Control").

How to activate

Press and hold 'Shift', while you do that, press 'Panel lock'

Examples of models using this method:

Remember this is just examples, and that this method is not exclusive to this RCP panel only, but all RCP models, with the config "RCP - Generic PTZ Control".

RCPv2
image-1654854347795.png

Method 5 - PTZ Pro (specific)

This technique is used for PTZ Pro only.

How to activate

Press and hold U4 for a few seconds 

Examples of models using this method:

This method is exclusive to the panel show below

PTZ Pro
image-1654845671513.png

Method 6 - Kairos (specific)

This technique is specific for our Kairos configuration for the Master Key One V2 (Blue pill inside)

How to activate

Step 1) Press 'Shift' to make the Fate To Black button light green
Step 2) Press 'FTB' to enter the engineering menu

Examples of models using this method:

This method is exclusive to the panel show below

Master Key One V2
image-1655362664920.png

Back to top