Skip to main content

Engineering Menu

Intro

The engineering menu contains panel settings like, Brightness control and dim/sleep time. You can also find expert mode and global Invert pan/tilt.

It can be accessed in different ways based on the panel, and chosen configuration.

How do I know which method my configuration is using?

 Here we have listed the different panel configurations that have the engineering menu. 

Method 1 - Camera selector

This technique is used for panel configurations that has a camera page cycle button.

How to activate

Press and hold the top edge of the 'Page' button  A  for a few seconds

Examples of models using this method:

Listed here is 4 panels that have support for a configuration, that have an engineering menu accessible the same way. Remember this is just examples, and that this method is not exclusive to these 4 panels.

PTZ Wiz
image-1655379303605.png

PTZ Fly
image-1655379131060.png


Rack Control Uno
image-1655379063433.png

Inline 22
image-1655378954026.png


Method 2 - Switcher Selector

This technique is used for panel configurations in the switcher class.

How to activate

Step 1) Press 'Shift'  A  to make the Fate To Black button light green
Step 2) Press 'FTB'  B  to enter the engineering menu

Examples of models using this method:

Listed here is 3 panels that have support for a configuration, that have an engineering menu accessible the same way. Remember this is just examples, and that this method is not exclusive to these 3 panels.

Airfly
image-1655378773661.png


Airfly Pro
image-1655378535087.png


Master Key One
image-1655378424611.png


Method 3 - MEGA Panel

This technique is used on panel MKT1B and MKT1A

How to activate

Step 1) Press 'Menu'  A  to make the settings button appear 
Step 2) Press 'settings'  B  to enter the engineering menu

Examples of models using this method:

This method is not exclusive to the panel showed below, but also MKT1A.

MKT1B
image-1655378154744.png


Method 4 - RCP

This technique is used for every RCP panel (with config: "RCP - Generic PTZ Control").

How to activate

Press and hold 'Shift', while you do that, press 'Panel lock'

Step 1) Press and hold the 'Shift' button  A 
Step 2) Now press the 'Panel lock' button  B  to enter the engineering menu

Examples of models using this method:

Remember this is just examples, and that this method is not exclusive to this RCP panel only, but all RCP models, with the config "RCP - Generic PTZ Control".

RCPv2
image-1655377892960.png


Method 5 - PTZ Pro

This technique is used for PTZ Pro only.

How to activate

Press and hold U4  A  for a few seconds 

Examples of models using this method:

This method is exclusive to the panel showed below

PTZ Pro
image-1655377701387.png

Method 6 - Kairos

This technique is specific for our Kairos configuration for the Master Key One V2 (Blue pill inside)

How to activate

Step 1) Press and hold the button marked  A  
Step 2) Now press the button marked   B  to enter the engineering menu

Examples of models using this method:

This method is exclusive to the Kairos configuration on the panel showed below

Master Key One V2
image-1655377595619.png

Back to top