Skip to main content

SONY ILMS-FR7

In order to connect to the SONY ILMS-FR7/ILMS-FR7K cameras, make sure you have VISCA enabled on the camera. This can be done by setting this DIP-Switch on the unit:

image.png

To enable Tally control from a BluePill device please enable "External Tally" in the cameras Web-UI:

image.png


When adding this device to Reactor, it should look like this, and it should also come up as an auto discovered device if you have NDI-HX enabled on the unit, even if you don't have the license for it:

image.png



To be expanded upon.

Back to top