Skip to main content

SONY ILMS-FR7

In order to connect to the SONY ILMS-FR7/ILMS-FR7K cameras, make sure you have VISCA enabled on the camera. This can be done by setting this DIP-Switch on the unit:

image.png


EXTERNAL TALLY

To enable Tally control from a BluePill device please enable "External Tally" in the cameras Web-UI:

image.png

 


ADDING DEVICE TO REACTOR

When adding this device to Reactor, it should look like this, and it should also come up as an auto discovered device if you have NDI-HX enabled on the unit, even if you don't have the license for it:

image.png

 


SPEED CONTROL

The joystick speed is not only controled by the 'JoystickSens' variable. This camera has 3 parameters to control the speed of the PTZ movement.

For maximum speed, please use:

  • "CAM_PTSPEEDSTEP" sets the range  >  set this to '9'
  • "CAM_PTSLOWMODE"  >  needs to be 'off'
  • "CAM_PTRAMPCURVE" is the accel speed  >  set this to 'Extend'

commands.png

Device core command list:
https://cloud.skaarhoj.com/coremanual/core-protocol-visca/pre/2811

 


NO CONNECTION

If you have the experience that it just wont connect at all, after having been working earlier, please try and restart the camera, there might be a client limit on the device

To be expanded upon.