Skip to main content

Setting Blue Pill Panel into Raw Panel Mode

To set up multiple Blue Pill Inside units to work in a group together, it is necessary to change some settings in the connected panels to allow them to be controlled by the main Blue Pill panel. 
The connected unit needs the following changes:
  1. Stop Reactor
  2. Disable Auto-Start
  3. Enable Listen on Port in Hardware Manager and disable Listen On Socket.


    Listen on Port.png
4. Set the Protocol Mode needed for the project. 
Protocol Mode.png
5. Set additional settings as needed/desired. 
Additional options.png
6. Save and restart

Back to top