Search Results

Links for manuals for working with Blue Pill devices as 'dump panels' in Raw Panel mode. Raw Panel v2 Download Link: https://github.com/SKAARHOJ/Support/raw/master/Manuals/SKAARHOJ/SKAARHOJ_RawPanel_V2.pdf Website Link: https://github.com/SKAARHOJ/Suppo...

There are four ways to access the parameter list for your devices.  Configuration Page Inspector When editing a parameter from the Inspector on the Configuration page, you can access the parameter list.  If there was not a parameter previously selected ...

The Parameter List gives a detailed breakdown of all of the supported parameters and the values available within. The parameter list generated per device core, which is the controlling firmware package for the device's remote protocol. Multiple devices can be...

Tether The Panasonic Lumix only allows 1 network connected client at a time. This means it is not possible to use both Panasonic's Tether interface and a Skaarhoj panel simultaneously.  Password Connectivity to the Panasonic Lumix requires a password. Due t...

The Transition Types constant set is used with the Panasonic Kairos curated configuration to set the 4 available transitions type buttons.  Column Description Order Allows for quick rearranging of channel order. Right clicki...

If after setting up your controller and connecting it to a switching device, your Skaarhoj panel is not properly showing the connection then it could be that the Device ID does not match the one the panel is looking for.  By default, the Skaarhoj Panel is g...

Have you tried turning the device off and on again? Sometimes all that is needed is a reboot. This can be done for the skaarOS / the full Blue Pill / or per package. No Access to Blue Pill Web Interface If you are not able to access Reactor webpage at all...

Please note: This video is made for Reactor 1.xWe have since released Reactor 2.x - and the video is no longer up-to-date. This guide show you how to make Page Layers. Say you wish control 8 parameters on a camera, but only have 4 encoders on your controller...

If the Blue Pill or Blue Pill Inside controller is showing in the panels sections of the Home screen as Unknown it could be a few issues.  1. Check that the panel's IP address in the device details section is set to HOST. This indicates that the device has ...

"If you enter the correct username and password, but are left in a loop on the login screen." Some Blue Pill devices with older software can have a bug, where the login page seems to be stuck. The solution to this is simply to use another web browser - ie. if...

"If you enter the correct username and password, but are left in a loop on the login screen." Some Blue Pill devices with older software can have a bug, where the login page seems to be stuck. The solution to this is simply to use another web browser - ie. if...

If your panel is not lighting up as it should, but everything else seems like it is working as expected, it may be the panel brightness is set too low.  By default a panel is set to inherit the brightness from the panel group it is in.  In the Panel Details,...

It is possible to control your Blackmagic cameras through an Atem switcher using your Skaarhoj Blue Pill panel.  Make sure you are have installed the BMD Atem device core package v0.0.6-pre21 or later. You can see what version you are currently using on the...

Blue Pill Units 1 USB-A Port. See Settings page for more details 2 SKAARHOJ Expansion Slot 3 HDMI Port serial diagnostics and debugging 4 Config Button to enable WiFi Access Point. See Accessing Blue Pill section in Getting Started ...

  Operating Temperature: 0° C to +40° C / +32° F to +104° F Max Internal Temperature: 80°C / 176°F Storage Temperature: -20° C to +45° C / -4° F to +113° F Humidity: 90\% RH, non-condensing, from -20° C to +45° C   The Blue Pill device’s internal process...

Graphical Display The Blue Pill has a graphical LED Display. By default this is set to go into a sleep mode to prevent image burn-in. The unit is still operational during sleep mode, it is only the display that effected. Burn-In caused after disabling sleep m...

Power over Ethernet (PoE) Specifications  We use the PoE industry standard 5W-30W PoE (+) IEEE802.3af/t. To power our controllers using PoE it is important the switch supports this standard. Please notice some manufactures such as Ubiquity have their own non-...

For full UniSketch panel guide see the UniSketch Installation and Operations Manual here: https://github.com/SKAARHOJ/Support/blob/master/Manuals/SKAARHOJ/SKAARHOJ_Manual.pdf Back Panel Connection 1. Micro USB plug. Used for service monitoring and program...