Search Results

Have you tried turning the device off and on again? Sometimes all that is needed is a reboot. This can be done for the skaarOS / the full Blue Pill / or per package. No Access to Blue Pill Web Interface If you are not able to access Reactor webpage at all...

This guide show you how to make Page Layers. Say you wish control 8 parameters on a camera, but only have 4 encoders on your controller. In this case you make two 'Pages' - or layers - and assign different commands in each 'Page'. You then assign a button to ...

If the Blue Pill or Blue Pill Inside controller is showing in the panels sections of the Home screen as Unknown it could be a few issues.  1. Check that the panel's IP address in the device details section is set to HOST. This indicates that the device has ...

"If you enter the correct username and password, but are left in a loop on the login screen." Some Blue Pill devices with older software can have a bug, where the login page seems to be stuck. The solution to this is simply to use another web browser - ie. if...

"If you enter the correct username and password, but are left in a loop on the login screen." Some Blue Pill devices with older software can have a bug, where the login page seems to be stuck. The solution to this is simply to use another web browser - ie. if...

Resources: Panasonic PTZ cameras - Accessories and settings to connect MKA1 (BPI), MKA2 (BPI) - Product details and price Panasonic PTZ Device Core Parameters - All the parameters we support Product Information Document MKA1 w/Blue Pill Inside - Prod...

Resources: Panasonic Kairos AT-KC1000, Panasonic Kairos AT-KC100 (firmware version: V1.2.2 for both models) - Accessories and settings to connect Master Key One (BPI) - Product details and price Kairos Device Core Parameter - All the parameters we suppo...

If your panel is not lighting up as it should, but everything else seems like it is working as expected, it may be the panel brightness is set too low.  By default a panel is set to inherit the brightness from the panel group it is in.  In the Panel Details,...

It is possible to control your Blackmagic cameras through an Atem switcher using your Skaarhoj Blue Pill panel.  Make sure you are have installed the BMD Atem device core package v0.0.6-pre21 or later. You can see what version you are currently using on the...

Blue Pill Units 1 USB-A Port. See Settings page for more details 2 SKAARHOJ Expansion Slot. See extension cables section for more details (coming soon) 3 HDMI Port serial diagnostics and debugging 4 Config Button to enable WiFi Acce...

  Operating Temperature: 0° C to +40° C / +32° F to +104° F Max Internal Temperature: 80°C / 176°F Storage Temperature: -20° C to +45° C / -4° F to +113° F Humidity: 90\% RH, non-condensing, from -20° C to +45° C   The Blue Pill device’s internal process...

Graphical Display The Blue Pill has a graphical LED Display. By default this is set to go into a sleep mode to prevent image burn-in. The unit is still operational during sleep mode, it is only the display that effected. Burn-In caused after disabling sleep m...

Power over Ethernet (PoE) Specifications  We use the PoE industry standard 5W-30W PoE (+) IEEE802.3af/t. To power our controllers using PoE it is important the switch supports this standard. Please notice some manufactures such as Ubiquity have their own non-...

3G SDI Arduino Shield The 3G SDI Arduino Shield imbedded in UniSketch panels is not compatible when using the UniSketch panel with a Blue Pill device. It will only function when working only via the UniSketch platform. The Blackmagic 3G-SDI Arduino Shield su...

Standard With SDI Option