Search Results

Navigating to a Device Manual Device cores manuals can be accessed from your Blue Pill  in the Device Core options popup.Click the title above a device you want to know about, to access this popop. And then click "Manual" How do I use the manual? The...

It is possible to control your Blackmagic cameras through an Atem switcher using your Skaarhoj Blue Pill panel.  Make sure you are have installed the BMD Atem device core package v0.0.6-pre21 or later. You can see what version you are currently using on the...

The currently recomended Core version for EOS C500 and EOS C300 is depended on the firmware version your cameras is on.This matrix should explain what Canon-XC core version as appropriate for your camera: Canon XC Core Version Device Core v0.1.9 or bel...

Adding and connecting to a Kessler Crane device from the Blue Pill platform The Blue pill can connect to a Kessler Crane device in two ways, via WiFi or USB. In both cases, there are some special things that needs to be handled for the Blue Pill Core to conne...

The Blue Pill device core, core-skaarhoj-rawpanel, is used by an application like Reactor to forward parts of a connected panel to external Raw Panel clients while other parts are used by Reactor itself. This aligns with how Raw Panel is natively implemented o...

How to set up Zoom OSC ZoomOSC is used to managed zoom calls, here is how to set it up Getting ZoomOSC Go to the website: https://www.liminalet.com/zoomosc From here you can press Download Now It will take you to a form you can fill out, and then you w...

Connecting To vMix v25 For your Blue Pills to control vMix v25 or v226, please check the setting marked in RED as that needs to be turned on, as shown below. The settings marked in green are not required but recommended for the security of your vMix setup an...

The TCP Server Device Core for Blue Pill, known as core-skaarhoj-tcpserver, enables users to connect one or multiple TCP clients to the device core, and read/write values to numerous internally stored data types. It's also an implementation of the data registe...

Open Sound Control (OSC) is a widely used protocol for controlling all sorts of devices. This is a generic protocol implementation, so you have to know the exact commands your device reacts to, and how to connect to it.OSC works by sending commands with an add...

In order to connect to the SONY ILME-FR7/ILME-FR7K cameras, make sure you have VISCA enabled on the camera. This can be done by setting this DIP-Switch on the unit: EXTERNAL TALLY To enable Tally control from a BluePill device please enable "External Tal...

Tether The Panasonic Lumix only allows 1 network connected client at a time. This means it is not possible to use both Panasonic's Tether interface and a Skaarhoj panel simultaneously.  Password Connectivity to the Panasonic Lumix requires a password. Due t...

The TCP Device Core for Blue Pill, core-protocol-tcp, allows users to send and to some extend receive and process information of TCP to both ASCII and binary servers. Effectively, this can help to bridge communication with devices where a dedicated device core...

This guide outlines cabling workflows to connect DreamChip cameras to SKAARHOJ-recommended third-party serial converters and test the connection. Cabling Options for DreamChip Cameras with SKAARHOJ Control Ethernet-Serial Converter: An affordable ...

This core will provide you with a quick way to send out emails, from the reactor ecosystem. using your own Gmail or resend.com setup. The core should also be compatible with other vendors, but we have only tested with these two. Device Setup: Please take a l...

The Biamp Tesira core has two different models, the Manual model and the Auto model. Manual Model The manual model works well for very simple setups, that only needs control of a few parameters. It requires a little more setup, but will not use as many resou...

If you have a PTZ controller you can use TSL as the Routing trigger. That could be beneficial if you want your Camera selector to also route a source external in equipment using TSL, like Tallyman. Add Cameras to your Controller Press Camera Selector ...

The HTTP Device Core for Blue Pill, core-protocol-http, allows users to send and to some extend receive and process information via HTTP requests. Effectively, this can help to bridge communication with devices with RESTful APIs where a dedicated device core i...

Firstly you need to download and install Blackmagic Camera Setup program from here https://www.blackmagicdesign.com/support/family/professional-camerasin Blackmagic Camera Setup you need to select these checkboxes for able to control the camera throw the REST ...

Before connecting the core to Livestream Studio first time you need to check in the Hardware Control if Third-party controllers are enabled.After you can start connecting your core to Livestream Studio. Your connection appears in pending connection -> You need...

You can connect to Sony FX6 camera via cabled Ethernet or Wifi. We strongly suggest to use cabled Ethernet.This will work with multiple FX6 cameras - they just need to have unique IP addresses. Wired LAN setup You need to enable Wired LAN in the camera setti...