Recently Updated Pages
IO References
This documentation has moved, see here: https://docs.skaarhoj.com/3_configuration/ioreference.html
Analog Component Calibration (BP Inside Devices)
Enable Calibration Profiles Please note, The Calibration Tool is only for Blue Pill Inside panel...
HID devices on Raw Panel
With SKAARHOJs HID application (xpanel-hids package) you can connect one or more particular USB d...
Raspberry Pi Media Player from SKAARHOJ
This page aims to assist you in getting started with SKAARHOJ's Raspberry Pi-based media player. ...
Setup Core-Email
This core will provide you with a quick way to send out emails, from the reactor ecosystem. using...
vMix v25 +
Connecting To vMix v25 For your Blue Pills to control vMix v25 or v226, please check the setting...
Zoom OSC with XPoint24
How to set up Zoom OSC ZoomOSC is used to managed zoom calls, here is how to set it up Gettin...
Raw Panel Device Core
The Blue Pill device core, core-skaarhoj-rawpanel, is used by an application like Reactor to forw...
TCP Device Core / UDP Device Core
The TCP Device Core for Blue Pill, core-protocol-tcp, allows users to send and to some extend rec...
TSL
If you have a PTZ controller you can use TSL as the Routing trigger. That could be beneficial if ...
Sony ILME-FR7
In order to connect to the SONY ILME-FR7/ILME-FR7K cameras, make sure you have VISCA enabled on t...
TCP Server Device Core
The TCP Server Device Core for Blue Pill, known as core-skaarhoj-tcpserver, enables users to conn...
Sony FX6
You can connect to Sony FX6 camera via cabled Ethernet or Wifi. We strongly suggest to use cabled...
Vimeo Livestream Studio
Before connecting the core to Livestream Studio first time you need to check in the Hardware Cont...
OBS Studio 28+
OBS Studio 28.0.0 and newer have obs-websocket support included in the firmware, so there is not ...
Panasonic Lumix
Tether The Panasonic Lumix only allows 1 network connected client at a time. This means it is no...
PTZ Trace on Blue Pill
PTZ Trace is a feature that simulates the operation of a PTZ (pan-tilt-zoom) camera using pre-rec...
Protocol-OSC
Open Sound Control (OSC) is a widely used protocol for controlling all sorts of devices. This is ...
Blackmagic Camera Control via Atem
It is possible to control your Blackmagic cameras through an Atem switcher using your Skaarhoj Bl...
Blackmagic Camera Control via Rest API
Firstly you need to download and install Blackmagic Camera Setup program from here https://www.bl...