Recently Updated Pages

When controlling individual video channels of an AJA FS series frame sync, it is important to add...

To connect the device core to Clear-Com, you need a Clear-Com Station IC client installed on your...

Connection and control of the Sony FX3 is possible via Skaarhoj panels with USB-A ports. This is ...

The Ross OGP core has the ability to capture all device parameter information and save it. This i...

The Video Follow Audio model of the Skaarhoj Producer Assistant core, provides functionalities fo...

The Tilta Nucleus Core supports control of Tilta Nucleus-M motors via a wired connection. It ope...

NETIO PDU's (Power Distribution Units) are network-based power sockets. You can read more about...

This guide will show you how to connect a Skaarhoj Waveboard to the Waves Cloud MX mixing platfor...

The Ember+ DeviceCore allows bluepills to control Ember+ Systems as Consumers. Using the built in...

OBS Studio 28.0.0 and newer have obs-websocket support included in the firmware, so there is not ...

The SKAARHOJ Arri device core can control Arri Cameras over CAP and older cameras over SSCP.Pleas...

Firstly you need to download and install Blackmagic Camera Setup program from here https://www.bl...

This core will provide you with a quick way to send out emails, from the reactor ecosystem. using...

Before connecting the core to Livestream Studio first time you need to check in the Hardware Cont...

The Biamp Tesira core has two different models, the Manual model and the Auto model. Manual Mode...

You can connect to Sony FX6 camera via cabled Ethernet or Wifi. We strongly suggest to use cabled...

Open Sound Control (OSC) is a widely used protocol for controlling all sorts of devices. This is ...

PTZ Trace is a feature that simulates the operation of a PTZ (pan-tilt-zoom) camera using pre-rec...

All Blue Pill integrations for the BirdDog cameras have been made using their NDI 5 firmwares. S...