Recently Updated Pages
Vimeo Livestream Studio
Before connecting the core to Livestream Studio first time you need to check in the Hardware Cont...
Sony FX6
You can connect to Sony FX6 camera via cabled Ethernet or Wifi. We strongly suggest to use cabled...
TCP Server Device Core
The TCP Server Device Core for Blue Pill, known as core-skaarhoj-tcpserver, enables users to conn...
Sony ILME-FR7
In order to connect to the SONY ILME-FR7/ILME-FR7K cameras, make sure you have VISCA enabled on t...
TSL
If you have a PTZ controller you can use TSL as the Routing trigger. That could be beneficial if ...
TCP Device Core / UDP Device Core
The TCP Device Core for Blue Pill, core-protocol-tcp, allows users to send and to some extend rec...
Raw Panel Applications
Raw Panel Explorer This application is helpful to scan the network for Raw Panel devices, conn...
Ross OGP - Model Dump
The Ross OGP core has the ability to capture all device parameter information and save it. This i...
Setup Core-Email
This core will provide you with a quick way to send out emails, from the reactor ecosystem. using...
Protocol-OSC
Open Sound Control (OSC) is a widely used protocol for controlling all sorts of devices. This is ...
Raw Panel Device Core
The Blue Pill device core, core-skaarhoj-rawpanel, is used by an application like Reactor to forw...
Camera Select
An example of a setup table would be a camera selector and can be seen below. These can be differ...
Devices Without Native Thumbnail Support
With the help of Blue Pill and Reactor, it is now possible to get thumbnail presets for almost an...
Quick Controls
Available on some controllers, Quick Control configs are not actually settings tables, however so...
Transition Types
The Transition Types constant set is used with the Panasonic Kairos curated configuration to set ...
Routing Triggers
An example of a Routing Triggers settings table can be seen below. From here the camera select wi...
Tally Forwarding
An example of a Tally Forwarding settings table can be seen below. From here the camera select bu...
Switcher Inputs
An example of a switcher inputs selector can be seen below. These can be different depending on t...
Routing Panels
An example of a router panel set up can be seen below. These can be different depending on the se...
Audio Channel Config
An example of an audio channel config can be seen below. These can be different depending on the ...